La technologie à rayons X mesure l'épaisseur de paroi du revêtement plastique des tubes et tuyaux en acier et l'épaisseur de paroi des tubes en aluminium
A plastic coating is among others applied at freely installed, underground and under water laid metal tubes and pipes for corrosion protection. The plastic coating has to meet certain specifications. Thus, in order to measure the wall thickness of the plastic coating, SIKORA’s X-ray-based X-RAY 6000 PRO is used for tubes and pipes with a diameter of up to 260 mm.
The X-RAY 6000 PRO is independent of the product material to be measured as well as the temperature; no coupling media or calibration is required. Precise measuring values are immediately retrievable with the online measurement. The data is visualized at the monitor of the processor system ECOCONTROL 6000 and enables the user to intervene into the process if needed. Hence, the SIKORA measuring system is an essential component for the assurance of the highest quality and an efficient process during production of plastic coated metal tubes and pipes. The X-RAY 6000 PRO can also be used for the wall thickness measurement of aluminum tubes.
|Measuring Principle||Non-contact with latest X-ray technology|
|Application and Material||Thickness measurement of the plastic coating (PE, PP, PVC) on metal tubes/pipes (cold measurement) and wall thickness measurement of aluminum tubes (cold measurement)|
|Measuring Range||4 to 260 mm|
|Safety (X-ray Radiation)||Radiation measurements by independent experts have revealed that the radiation of the X-AY 6000 PRO is far below limiting values of all international regulations|
|Measuring Frequency||1 to 3 Hz (optional 10/25 Hz)|
Optional: industrial fieldbus (e.g. Profinet IO, EtherNet/IP, Profibus-DP, CANopen, DeviceNet), LAN, OPC DA/UA
|Power Supply||100 - 240 V AC ± 10 %, 50/60 Hz|