At IPF in Tokyo (October 24-28, 2017), SIKORA is following seamlessly on from its earlier performances at renowned trade fairs for plastics, such as K in Düsseldorf and Chinaplas in Shanghai. Innovative measuring, control, inspection, analysis and sorting devices for the hose, tube, sheet and plastics industries will be presented.
CENTERWAVE 6000: Measurement of large pipes with millimeter wave technology
With the CENTERWAVE 6000, SIKORA presents a main actor for the measurement of diameter, ovality, wall thickness and sagging of large plastic pipes during the extrusion. The system is based on millimeter wave technology and measures pipes from 90 to 3,500 mm. The CENTERWAVE 6000 is available in a rotating version and thus offers the complete recording of the wall thickness at 360 points of the entire circumference of the pipe. Alternatively, a multiaxial system is available with static sensors. Both systems measure completely contact-free, they do not require any coupling media nor calibration and are independent of the material and temperature of the pipe. In addition, the PLANOWAVE 6000, also based on millimeter wave technology, will be presented. It is used for thickness measurement of plastic sheets.

The CENTERWAVE 6000 measures plastic pipes with a diameter of 90 to 3,500 mm
PURITY SCANNER ADVANCED: Online inspection and sorting of plastic pellets with a flexible camera concept
Another highlight at IPF is the PURITY SCANNER ADVANCED for online inspection, and sorting of plastic material. The unique combination of an X-ray camera with a flexible, optical camera system is the only technology at present that reliably detects contamination on the surface as well as inside of plastic pellets. Contaminated pellets are automatically sorted out. The user decides with which camera configuration the PURITY SCANNER ADVANCED will be delivered. Depending on the type of contamination and application, optical high-speed cameras as well as X-ray and color cameras are coming into use.

The PURITY SCANNER for online inspection and sorting of plastic pellets
Offline inspection and analysis of pellets, flakes and films/tapes with the PURITY CONCEPT systems
For smaller material throughputs and for applications where sampling analysis or incoming goods inspection are sufficient, SIKORA’s engineers developed the PURITY CONCEPT Systems. Alternatively, these analysis devices can be equipped with X-ray technology or optical cameras and detect contamination in pellets, flakes, films/tapes and crosshead parts. The PURITY CONCEPT Systems are used, for example, for analyzing pellets, which were detected and sorted out by the PURITY SCANNER.

The PURITY CONCEPT Systems are applied for the offline inspection and analysis of pellets, flakes and films/tapes
Comprehensive portfolio for measuring devices for hose and tube extrusion
For hose and tube extrusion lines, SIKORA’s product spectrum ranges from devices for innovative diameter measurement with the LASER Series 2000 and 6000 to lump detectors for the detection of irregularities on the product surface and further to the X-ray measuring systems of the X-RAY 6000 series. Due to the precise measurement of the inner and outer diameter, the wall thickness of up to 3 layers, the eccentricity as well as the ovality of products, the systems ensure manufacturers the highest quality as well as cost savings and profitability during extrusion.

The X-RAY 6000 measures the inner and outer diameter, ovality, wall thickness and eccentricity of hoses and tubes
Visit the SIKORA booth 62511.